Fujitsu PRIMERGY RX200 S4 User Manual page 188

Chapter 7 Configuring Hardware and Utilities
Item
Memory Power Mode
High Bandwidth
CPU Frequency (GHz)
Core Multi-Processing
CPU Mismatch Detection
CPU Timeout Counter
Enhanced Idle Power State
Limit CPUID functions
CPU Thermal Management
CPU Halt Mode
NX Memory Protection
CPU MC Status Clear
Enhanced Speed Step
Virtualization Technology
Hardware Prefetch
Adjacent Sector Prefetch
HIGH Precision Event
Timer
I/O AT
188
table: Items on the Advanced System Configuration Submenu
Setting
• Performance
(Initial value)
• Energy
Enabled (Unchangeable)
Automatic (Unchangeable)
Enabled (Unchangeable)
Enabled (Unchangeable)
Disabled (Unchangeable)
• Disabled (Initial value)
• Enabled
Disabled (Unchangeable)
Enhanced (Unchangeable)
Enhanced (Unchangeable)
• Disabled (Initial value)
• Enabled
Next Boot (Unchangeable)
• Disabled (Initial value)
• Enabled
• Disabled (Initial value)
• Enabled
Enabled (Unchangeable)
Enabled (Unchangeable)
Disabled (Unchangeable)
Disabled (Unchangeable)
Description
Sets memory power control. This item may not be
displayed depending on the BIOS version.
Sets Front Side Bus (FSB). This item may not be
displayed depending on the BIOS version.
Sets the CPU clock frequency.
Sets whether to enable or disable the multi-core
function.
Sets whether to enable or disable checking the CPU
type and frequency.
Not supported by this server.
Sets the power control for when the OS is idling.
This item may not be displayed depending on the
BIOS version.
Configures the CPU internal settings.
Sets whether to enable or disable the processor's
Data Execution Prevention (DEP) function.
Configures the CPU internal settings.
Sets whether to enable or disable power saving
function.
This item is displayed when a Xeon processor other
than X5405 is installed.
Sets whether to enable or disable CPU
Virtualization Technology. When exiting the BIOS
Setup Utility after changing the setting value and
saving the configuration, the server will be restarted
automatically.
Configures the CPU internal settings.
Configures the CPU internal settings.
Sets whether or not to use the high precision event
timer of the chipset.
Sets whether or not to use the extended data transfer
function between chipsets.