Precautions On Installation; Installation Partition Size; Notes On Configuring Raid - Fujitsu PRIMERGY RX200 S4 User Manual

2.3 Precautions on Installation

Observe all the following notes before starting OS installation.

2.3.1 Installation Partition Size

The installation partition sizes are stated as below when using ServerStart to install your OS.
• Maximum size: 2TB
• Minimum size: 2200MB
Notes
• When setting the OS and BOOT partitions on different partitions, specify the partition size directly.
The BOOT partition indicates the partition for startup. Minimum information required for startup
such as "ntldr" is allocated on the partition.
The OS partition indicates the partition for installing the OS.
• In either of the following cases, specify a partition size 2TB or less.
• When the same partition is specified as the OS and BOOT partitions
• When different partitions are specified as the OS and BOOT partitions
• The OS cannot be installed on a partition larger than 2TB.

2.3.2 Notes on Configuring RAID

Observe the notes described as follows prior to configuring RAID.
Hard disk unit
• Only internal hard disk units can be used. Up to two internal hard disk units can be installed in the
3.5-inch Hard Disk Type server, and up to four hard disk units can be installed in the 2.5-inch Hard
Disk Type server. However, the number of available hard disk units that can be installed varies
depending on the RAID level. For details, refer to Array Controller Document & Tool CD.
• Be sure to use hard disk units of the same model with the same capacity.
Array configuration
Array controllers to be used vary depending on model of the server. For RAID configuration of each
model, refer to applicable manuals.
When using a SAS Ctrl (Integrated Mirroring SAS) (SAS model only)
Configure RAID with an internal hard disk which is connected to a SAS Ctrl. The array controller to be
employed is "Integrated Mirroring SAS" and available RAID level is "RAID1" only. For details, refer to
"Integrated Mirroring SAS Users Guide" in Array Controller Document & Tool CD.
PRIMERGY RX200 S4 User's Guide
43