Inserting And Ejecting A Cd/Dvd - Fujitsu PRIMERGY RX200 S4 User Manual

In other cases, press the power switch of the server after shutting down the OS and making
sure that the hard disk access LED is off. The power LED lights amber.
3
Turn off the display and peripheral devices.
The time to turn off the server can be set with the ASR setting (on the [Power On/Off] tab) using
ServerView.
For details, refer to "3.4 Serious Error Handling (ASR)" in "ServerView User's Guide".
Cautions for turning the power on/off (for a Windows Server 2008 or
Windows Server 2003)
The operation of the power switch can be specified as "Do Nothing", "Prompt Input" (only for Windows
Server 2003), "Standby", "Hibernate", and "Shutdown" depending on the OS settings. The default is
"Shutdown".
On this server, functions corresponding to "Standby" and "Hibernate" are supported as BIOS and
hardware functions. However, some drivers and software installed in the server do not support these
functions. For this reason, functions corresponding to "Standby" and "Hibernate" are unavailable on this
server.
When the operating mode is set to "Standby" or "Hibernate", the system may operate improperly or hard
disk data may be corrupted.
For details about operating mode settings, refer to the manual supplied with the OS.

1.4.4 Inserting and Ejecting a CD/DVD

The optional DVD-ROM unit can be installed in this server.
This section explains how to insert and eject a CD/DVD.
Vision Damage
Cautions when handling drives
• High humidity and airborne dust levels are to be avoided. Electric shocks and/or server failures may
be caused by liquids such as water, or metallic items, such as paper clips, entering a drive.
• Shocks and vibrations are also to be avoided.
• Do not insert any objects other than the specified CDs/DVDs.
• Do not pull on, press hard, or otherwise handle the CD/DVD tray roughly.
• Do not disassemble the CD/DVD drive.
• Before use, clean the CD/DVD tray using a soft, dry cloth.
• As a precaution, remove discs from the CD/DVD drive when the drive is not to be used for a long
time. Keep the CD/DVD tray closed to prevent foreign matter, such as dust, from entering the CD/
DVD drive.
• Do not look at the light source of the CD/DVD drive laser beam directly. Doing
so may lead to visual damage.
PRIMERGY RX200 S4 User's Guide
33