Console Redirection Submenu - Fujitsu PRIMERGY RX200 S4 User Manual

Chapter 7 Configuring Hardware and Utilities

7.2.16 Console Redirection Submenu

This submenu appears when selecting [Console Redirection] from the [Server] menu.
Use this submenu to configure detailed settings for console redirection.
Console Redirection:
F1 Help
Esc Exit
Item
Console Redirection
Port
Baud Rate
Protocol
Flow Control
Mode
198
PhoenixBIOS Setup Utility
Server
Console Redirection
[Disabled]
-/+ Change Values
Select Item
Select Menu
Enter Select > Sub-Menu
table: Items on the Console Redirection Submenu
Setting
• Disabled (Initial value)
• Enabled
Serial 1 (Initial value)
• 1200
• 2400
• 4800
• 9600 (Initial value)
• 19.2K
• 38.4K
• 57.6K
• 115.2K
• VT100
• VT100, 8bit
• PC-ANSI, 7bit
• PC-ANSI
• VT100+ (Initial value)
• None
• XON/XOFF
• CTS/RTS (Initial value)
• Standard
• Enhanced (Initial value)
Item Specific Help
Description
Sets whether to enable or disable console
redirection.
Sets the serial port to be used for console
redirection.
This submenu appears when [Console Redirection]
is set to "Enabled".
Sets the baud rate to be used for console redirection.
This submenu appears when [Console Redirection]
is set to "Enabled".
Sets the console type for console redirection.
This submenu appears when [Console Redirection]
is set to "Enabled".
Sets the flow control.
This submenu appears when [Console Redirection]
is set to "Enabled".
Sets the range of use for console redirection.
This submenu appears when [Console Redirection]
is set to "Enabled".