Fujitsu PRIMERGY RX200 S4 User Manual page 81

6
Click [Finish].
Backup process starts.
7
If a message prompts you to insert a floppy disk, insert the floppy disk and click
[OK].
Automated system recovery disk is created.
8
When the process is completed, a message appears. Eject the floppy disk
according to the message and put a label on it.
Label example: Windows Automated System Recovery Disk: Backup.bkf, Created at 12:00 04/
01/2003
9
Click [OK] to exit [Backup Utility].
10
Click [Close] to close the [Backup Progress] window.
An automated system recovery set has been created.
Store the automated system recovery set just created just in case.
PRIMERGY RX200 S4 User's Guide
81