Fujitsu PRIMERGY RX200 S4 User Manual page 150

Chapter 6 Installing Internal Options
Product name
Eth. Ctrl 1x1Gbit PCI-E 1000BASE-SX lp
*1: The SAS RAID Ctrl PG-248C and PG-244C1 cannot be installed at the same time.
SATA model
Product name
SAS RAID Ctrl
SAS RAID Ctrl
Fibre Channel Controller
SAS Ctrl
SCSI Ctrl U320 lp
Eth. Ctrl 2x1Gbit PCI-E 1000-BASE-T lp
Eth. Ctrl 1x1Gbit PCI-E 1000-BASE-T lp
Eth. Ctrl 1x1Gbit PCI-E 1000BASE-SX lp
Installation location and order of expansion cards
Install each expansion card in the PCI slots in the number order described in the following table and
install them according to the installation order. Expansion cards will not operate normally unless
installed in the specified locations.
SAS model
Product name (Product ID)
SAS Ctrl (installed as a standard feature)
SAS RAID Ctrl (PG-248B)
SAS RAID Ctrl (PG-248C)
SAS RAID Ctrl (PG-244C1)
SAS RAID Ctrl (PG-248G1L)
Fibre Channel Controller (PG-FC202)
SAS Ctrl (PG-228BL)
SCSI Ctrl U320 lp (PG-2281L)
Eth. Ctrl 2x1Gbit PCI-E 1000-BASE-T lp (PG-2861L)
Eth. Ctrl 1x1Gbit PCI-E 1000-BASE-T lp (PG-289L)
Eth. Ctrl 1x1Gbit PCI-E 1000BASE-SX lp (PG-288L)
: indicates that it can not be installed.
—
*1: The SAS RAID Ctrl PG-248C and PG-244C1 cannot be installed at the same time.
150
table: Installable expansion cards
Product ID
PG-288L
table: Installable expansion cards
Product ID
PG-244C1
PG-248G1L
PG-FC202
PG-228BL
PG-2281L
PG-2861L
PG-289L
PG-288L
table: Installation location/order of expansion cards
*1
*1
Remarks
1000BASE-SX, PCI-Express
Remarks
for SX35, LowProfile, FullHeight, with BBU
LowProfile, Cache capacity: 512MB, with BBU
PCI-Express
for SX10 S2, LowProfile
Ultra320SCSI, LowProfile, for optional SCSI
devices
1000BASE-T, LowProfile, Dual Port
1000BASE-T, LowProfile
1000BASE-SX, PCI-Express
PCI slot Maximum
number of
1 2 3
installed cards
— — 1
1
— — 1
1 1
— — 1
1
— 1 — 1
1
1 1
2 —
1 2 —
1
1 2 —
2
— 2
1 2
—
1 2 2 2
—
1 2 2
—
1 2 2
Installation
order
1
2
3
4
5
3
6
7
2
8
9
10
11