Fujitsu PRIMERGY RX200 S4 User Manual page 168

Chapter 6 Installing Internal Options
How to remove internal 3.5-inch hard disk units
1
Open the rack door.
"1.4.1 Opening the Rack Door" (p.29)
2
Turn off the server and all peripheral devices, and unplug all power cables from
the server.
"1.4.3 Turning Off the Server" (p.32)
3
Touch a metal part of the server to discharge static electricity from your body.
4
Remove the internal hard disk unit.
1. Pressing the tab at the front of the internal hard disk unit, hold up the handle.
2. Pull out the unit towards you.
Pull out the internal hard disk unit with both hands.
5
Install a new internal hard disk unit or a dummy unit.
"6.7.3 How to Install Internal 3.5-inch Hard Disk Units" (p.166)
168
(1)
Tab
Handle
(2)