How To Install - Britax Safe N Sound Compaq MKII Instructions For Installation & Use

INSTALLING INTO A VEHICLE
WITH SEATBELT. (REARWARD
FACING)
A. Position restraint rearward facing in the chosen
seating position in the car where a child
restraint anchor fitting is installed.
B. Undo the buckle and place buckle tongues in
the Harness Tongue Holders on each side of
the cover.
C. Remove padded insert (if fitted), and
gently lift headrest trim end, then pull
backwards the centre panel flap, with the
comfort pad from the inner seat of trim.

HOW TO INSTALL

Front of Vehicle
A
D
Harness
Tongue
Holders
Insert pad
C
D
REARWARD FACING
blue
BELT PATH
label
Instructions for Installation & Use
29