Britax Safe N Sound Compaq MKII Instructions For Installation & Use page 63

HOW TO INSTALL USING ISOFLEX CONNECTORS
INSTALLING THE RESTRAINT INTO THE CAR
USING ISOFLEX CONNECTORS (IF FITTED) AND TOP TETHER
To prevent damage to vehicle seat it may be necessary to remove or
open a trim covering the ISOFIX low anchorages.
A. Locate the ISOFIX Low Anchorages in the vehicle rear seat. The
location may be identified by one of the following symbols, or the
anchorage bars may be visible.
If you cannot locate them, check your vehicle owners manual.
B. With the restraint upright, remove both ISOFLEX connectors from
storage on the upper sides of the restraint by pressing the red
button on the connector.
ISOFIX low anchors of the
vehicle seat
Instructions for Installation & Use
63