Britax Safe N Sound Compaq MKII Instructions For Installation & Use page 70

HOW TO USE
PLACING CHILD IN THE
RESTRAINT
A. Ensure the headrest and shoulder straps are
adjusted to the correct height for your child (see
page 67. Loosen shoulder straps by pressing the
harness adjuster and pull both shoulder straps
evenly. Pull out the desired amount of slack.
Place the two harness tongues into the Buckle
Tongue Holder (if fitted).
Move the harness buckle towards the harness
adjuster for easier fitment next time you put the
infant in the carrier.
B. Place child in the restraint and feed each arm
through the shoulder straps. Pull harness buckle
up between child's legs.
IMPORTANT :
Always adjust the height of the headrest, thus the
shoulder straps as the child grows.
C. Fit either harness tongue into the harness buckle followed by the other tongue. A click is heard when
the last tongue is fully engaged.
Should the second tongue not engage - press the red button and reinsert the tongues. Ensure secure
engagement by pulling harness straps. If the harness buckle does not engage correctly then it may
require cleaning or seek replacement - refer to page 75. The buckle tongues are fully engaged when
both tongues are inserted and 'click' is heard.
Tongue
70
Instructions for Installation & Use
Buckle
A
Click