Britax Safe N Sound Compaq MKII Instructions For Installation & Use page 80

CARE & MAINTENANCE
To remove headrest cover from adjustable headrest without side wings:
Remove headrest cover by unclipping the press studs next to shoulder
harness, place shoulder harness straps to the side. Unhook the elastic
loop attached to the headrest cover. Lift over and away from headrest
without side wings.
Press
Studs
To Remove Alternative headrest cover with soft wings:
Remove headrest cover by unclipping the press studs next to shoulder
harness. Unclip press studs from headrest without side wings moulding
on each side. Place shoulder harness straps to the side. Lift headrest
cover over and away from headrest without side wings.
Press
Studs
80
Instructions for Installation & Use
Unhook elastic loop
attached to headrest cover
Unclip press stud from
moulding