Britax Safe N Sound Compaq MKII Instructions For Installation & Use page 77

REGULAR CARE OF THIS RESTRAINT:
Please check the following items regularly to ensure the safety of your child:
A. Check the webbing of the straps for fraying,
B. Check there are no cracks in moulding,
C. Check the harness adjuster is operating and is clamping the webbing,
D. Ensure the buckle is free of fluff, liquid or other matter that may enter the buckle slots. Clean the buckle
if it is sluggish to engage. See next page.
E. If any part of the restraint is cracked or broken, seek repair immediately - contact Britax Customer
Service 1300 303 330
CLEANING CAR SEAT
Use only mild soap and water to clean all metal and plastic parts of the restraint. Do not use chemicals or
cleaning agents.
HARDWARE: Use only mild soap and water to clean all webbing, metal and plastic parts of your child's
restraint, using a damp cloth.
Do not use chemicals or cleaning agents. Do not try and place any hardware into a washing machine.
STRAPS/HARNESS: We only recommend that you spot clean the straps/ harness with a damp sponge.
The harness straps can be soaked, however they must be thoroughly dried without excessive heat (never
tumble dry). The harness straps should not be placed in a washing machine as this may cause damage to
the stitching or even damage your washing machine.
COVER: The restraint has a flame retardant cover which is removable for cleaning, please clip the hook
and loop together on the cover and seat pad (if supplied) to prevent any damage to the cover when
washing. Cleaning instructions are on the care label attached to the cover. For machine washable covers
use gentle cycle, cold water only, rinse well and dry on a flat surface. Do not tumble dry, bleach or dry-
clean. May be hand washed. Follow the care label on the cover.
CARE & MAINTENANCE
Instructions for Installation & Use
77