Britax Safe N Sound Compaq MKII Instructions For Installation & Use page 50

HOW TO REMOVE
REMOVE RESTRAINT FROM VEHICLE
DISCONNECT TOP TETHER AND
SEATBELT
A. Disengage the vehicle seatbelt buckle from any
lock-off devices. Remove seatbelt from the restraint
belt paths.
B. Remove the top tether strap from pocket and fully
press top tether adjuster button (A) while pulling top
tether strap (B) to slacken as shown. In some vehicles
loosening of the top tether strap may be difficult. If so,
try pushing the restraint against the vehicle seat back
or slightly lifting the restraint to release the tension.
C. Disengage the attachment clip from upper anchorage
fitting. The child restraint is now disconnected.
D. To store the stabilising bar, lift the front flap
at the end of the seat, this uncovers the
stabilising bar storage recess.
E. Press the blue button on left side (facing
seat) and gently push stabilising bar back
and then down into the recessed area.
F. Re-attach the seat pad at the end of the
seat.
Store instruction manual in pocket provided
and tuck pocket under trim cover.
50
Instructions for Installation & Use
Fully press Adjuster Button (A)
while pulling Top tether Strap (B) to
lengthen.
Hook and Loop
attachment
Stabilising
bar
Rotate
backwards
A
B
front
flap
Then push
inwards
Button under trim