Britax Safe N Sound Compaq MKII Instructions For Installation & Use page 47

F. Fit either harness tongue into the harness buckle followed by the other tongue. A click is heard when
the last tongue is fully engaged.
Should the second tongue not engage - press the red button and reinsert the tongues. Ensure secure
engagement by pulling harness straps. If the harness buckle does not engage correctly then it may
require cleaning or seek replacement - refer to page 79. The buckle tongues are fully engaged when
both tongues are inserted and a 'click' is heard.
Tongue
Buckle
G. Ensure slack is removed from harness lap strap by
pulling shoulder straps then pull harness adjustment
strap to adjust harness to a comfortable but firm fit.
Ensure that any slack in harness straps is removed.
Shoulder harness straps must fit firmly to the child.
A loose harness could result in serious injury in an
accident. Do not over tighten.
Do not use the restraint if straps do not tighten. Contact your
local authorised service agent for repair.
HOW TO USE
Pull to remove slack from
harness lap straps
Shoulder
Straps
Crotch
Straps
Instructions for Installation & Use
Click
Harness
Lap Straps
G
47