Britax Safe N Sound Compaq MKII Instructions For Installation & Use page 27

PREPARING FOR INSTALLING INTO VEHICLE - REARWARD FACING
The restraint is normally packaged in the fully upright, forward
facing mode, if you need to use it rearward facing you must first
fully recline the restraint, and convert it to rearward facing mode
as shown below.
If upper anchorage strap is folded up for storage undo storage
strap to lengthen. Fully press adjuster button (A) while pulling
upper anchorage strap (B) to lengthen.
CONVERT TO REARWARD FACING MODE
A. To fully recline the restraint, move recline foot by
pulling the recline foot handle and rotating to the rearward
facing position (refer to label on the side of the restraint)
until the handle locks into position. Ensure recline foot
locks into position.
Pull down
HOW TO INSTALL
Fully press Adjuster Button (A) while
pulling Upper Anchorage Strap (B)
to lengthen.
Rotate recline foot
to rearward facing
position
Recline
position
indicator
Rotate
Instructions for Installation & Use
A
Pull Recline Foot Handle
and rotate to adjust
B
27