Britax Safe N Sound Compaq MKII Instructions For Installation & Use page 68

HOW TO USE
HOW TO ADJUST THE HEADREST &
HASSLE FREE HARNESS™
When the child restraint is out of the vehicle, this method
can be used to adjust the headrest to an approximate
position for the child.
A. Loosen the harness straps before adjusting the
headrest.
B. To make adjustments you will need to remove the child
and the restraint from the vehicle or loosen the seatbelt.
The next method on page 35 will be more convenient
as you will not need to remove the restraint from the
vehicle.
C. To adjust the headrest, pull on the latch at the back of
the restraint and move up or down to position the bottom
of the headrest to be just above the child's shoulders.
Release the latch to lock the headrest in position. Pull
headrest upwards to check it is locked in position. Adjust
the headrest and the shoulder straps to the final fit on
the child.
IMPORTANT :
Ensure harness and headrest are positioned so
that the shoulder straps are just above or inline
with the child's shoulders but not lower. The
bottom of the headrest side wings will usually be
just above the child's shoulders.
It is not necessary to remove the harness straps
to adjust the headrest position. Refer to Care
and Maintenance for cover removal page 79.
68
Instructions for Installation & Use
Latch
Pull