Britax Safe N Sound Compaq MKII Instructions For Installation & Use page 32

HOW TO INSTALL
G. Fit the attachment clip to the car's anchor fitting as
shown right. Make sure to remove as many twists as
possible from the upper anchorage strap.
H. Tighten top tether strap by pulling adjustment strap
to remove slack, leave the strap slack on the side the
baby will be placed into the seat from. Any slack will
be removed once the baby has been harnessed into
the seat.
I. Remove the slack from the adjustable top tether strap
by pulling adjustment strap (3), After the baby is fitted
in to the harness, remove all slack in the top tether
strap and roll up excess strap and place in the pocket
provided.
Do not tighten the top tether strap such that the
restraint is lifted up. Remove slack only.
CAUTION:
CHILDREN CAN BE INJURED OR RESTRAINTS AND TOP
TETHER STRAP DAMAGED BY UNSECURED CARGO IN A
COLLISION. SECURE OR REMOVE HAZARDOUS CARGO
BEFORE USING THIS CHILD RESTRAINT.
32
Instructions for Installation & Use
Attachment Clip
Car's Anchor Fitting
Fully press Adjuster Button (1) while
pulling Upper Anchorage Strap (2)
to lengthen.
1
Pull Adjustment Strap
to remove slack
Roll up excess strap and
store in the pocket attached
to the cover.
2
3