Britax Safe N Sound Compaq MKII Instructions For Installation & Use page 67

HARNESS POSITION & HEADREST HEIGHT:
FOR FORWARD-FACING MODE
Correct fitment of the harness is very important as it restrains the child in the restraint. The headrest must
be in the correct position and the harness must fit firmly around upper torso of the child and be positioned
so as to leave the child's arms and legs free.
Adjustment of the headrest automatically adjusts the harness shoulder strap position. If the headrest has
side wings they should be just above the child's shoulders. If there are no side wings, the shoulder straps
must be in the slots which are nearest to the child's shoulders, but not more than 25 mm below the child's
shoulders.
Always adjust the height of the headrest, thus the shoulder straps as the child grows.
If the headrest is in the top position and the shoulders are above the upper shoulder height marker then
the child is too tall for the restraint and the restraint should not be used; move to next type of restraint (see
pages 21).
NOTE: This child restraint does not require the shoulder straps to be disconnected to adjust their height,
only the headrest needs to be moved to adjust the shoulder strap position.
Harness tongues
Buckle
Lower shoulder height marker
HOW TO USE
Harness Shoulder slots
Shoulder harness straps
Harness Adjustment Lever
under flap
Harness adjuster strap
Instructions for Installation & Use
67