Britax Safe N Sound Compaq MKII Instructions For Installation & Use page 33

FITTING SUMMARY
A single twist
is required in
rearward-facing
mode.
Pull to remove some
slack - do not over
tighten when finally
adjusted with the
baby
DO NOT USE RESTRAINT IN REARWARD FACING MODE
WITHOUT STABILISING BAR FULLY EXTENDED.
THE TOP TETHER STRAP MUST ALWAYS BE FITTED
WHEN THE CHILD RESTRAINT IS USED IN A VEHICLE.
ALWAYS ATTACH THE HOOK AND REMOVE THE SLACK.
Leave one side of the tether strap slack to
allow the baby to be placed in the restraint.
HOW TO INSTALL
Hook Attachment Clip to
the car's anchor fitting.
Pull sash portion of
seatbelt to remove slack.
Feed seatbelt between
restraint cover and restraint
body (see pages 29 -31).
Store instruction manual
in pocket provided and
tuck pocket under trim
cover.
Instructions for Installation & Use
33