Britax Safe N Sound Compaq MKII Instructions For Installation & Use page 85

TO REPLACE SHOULDER STRAPS:
If the harness straps have been removed from the
metal strap connector.
A. Refit the harness strap by feeding through the
previous shoulder strap slots in the headrest.
MUST thread the shoulder strap OVER cross
bar and then re-attach the straps to metal strap
connector at the back of the seat (as shown here).
Check that the straps are connected and none of
the harness straps are twisted.
B. Refit any cover trims and/or accessories as per
their instructions.
ONLY USE BRITAX SAFE-N-SOUND SEAT COVERS AND
ACCESSORIES THAT ARE DESIGNED AND TESTED FOR USE WITH
THIS PRODUCT.
VERY IMPORTANT:
Only replace the cover with Safe-n-Sound supplied
replacement cover with identical shoulder
height markers or a replacement cover meeting
AS/NZS 8005.
CARE & MAINTENANCE
You
Instructions for Installation & Use
Cross Bar
Metal Strap Connector
85