Britax Safe N Sound Compaq MKII Instructions For Installation & Use page 41

HOW TO INSTALL USING ISOFLEX CONNECTORS
ANGULAR ADJUSTMENT OF RESTRAINT
Some vehicle seats have more rearward slope than others. If the angle of the seat causes the baby to
be too upright for comfort, the angle may be altered by placing a firm packing between the seat and the
underside of the base. Packing can be a firmly rolled up towel.
Do not remove all of the rearward slope by over packing. Always leave a rearward slope angle of
approximately 10 to 15 degrees as shown
10° to 15°
The stabilising bar does not
need to contact the back of the
car's seat, provided the seatbelt
is tight. If desired this gap may
be packed.
Instructions for Installation & Use
41