Britax Safe N Sound Compaq MKII Instructions For Installation & Use page 39

HOW TO INSTALL USING ISOFLEX CONNECTORS
Pull to
remove some
slack - do not
over tighten
when finally
adjusted with
the baby
A single
twist is
required in
rearward
facing
mode.
Do not use this
slot for rearward
facing installation
DO NOT USE RESTRAINT IN REARWARD FACING MODE WITHOUT
STABILISING BAR FULLY EXTENDED.
THE TOP TETHER STRAP MUST ALWAYS BE FITTED WHEN THE
CHILD RESTRAINT IS USED IN A VEHICLE.
ALWAYS ATTACH THE HOOK AND REMOVE THE SLACK.
Leave one side of the tether strap slack
Attachment Clip
Car's upper anchorage point
ISOFIX Compatible version shown.
Instructions for Installation & Use
39