Britax Safe N Sound Compaq MKII Instructions For Installation & Use page 49

H. Adjust the top tether strap by pulling adjustment
strap to remove slack as shown.
Ensure the strap is not so tight as to lift the seat
or deform the headrest. Only remove the slack.
I. Always roll up excess strap and place in the
pocket provided attached to the cover.
REMOVING CHILD FROM RESTRAINT
A. Press top tether strap adjuster lever while pulling top
tether straps to slacken. Allow top tether straps to fall
to the sides for easy access to child.
B. Push and hold the harness adjustment button while
pulling both shoulder harness straps to fully slacken
the harness.
C. Press the red button on harness buckle, both harness
tongues will be released. Insert buckle tongues into
harness tongue holders to hold harness straps away
from the child. Move each shoulder strap to baby's side
then pick up baby.
To remove the seat refer to page 50 for ISOFLEX
installation or page 49 for seatbelt installation.
HOW TO USE
Press
Roll up excess strap
and store in the pocket
attached to the cover
to avoid tripping when
moving the restraint.
Harness Tongue Holders
(where fitted)
Instructions for Installation & Use
Pull Adjustment
Strap to remove
H
slack
I
49