Britax Safe N Sound Compaq MKII Instructions For Installation & Use page 79

CARE & MAINTENANCE
COVER (STYLE MAY VARY)
The restraint has a flame retardant cover which is removable for
cleaning. Cleaning instructions are on the care label attached to
the cover. If a fluffy cover is fitted then washing cover prior to use
should remove excess fluff.
Drying the padded insert will take additional time as the comfort
foam will absorb moisture. Before washing re-engage any
hook and loop on the cover and padded insert to prevent fabric
damage. The cover has been designed to protect your child when
seated in the restraint. Care should be taken if children either
eat or drink while in the restraint as some food or drink products
may cause damage or marking to the cover. Wash or clean
immediately.
Do not pull sticky items from covers as the cover may be
damaged - soak in water and gently remove.
IMPORTANT:
Do not pull sticky items from covers as the cover may be damaged - soak in water and gently remove.
TO REMOVE COVER:
NOTE: There is no need to disconnect the shoulder harness
assembly straps from restraint.
A. Remove the restraint from vehicle.
B. Disengage the harness tongues from the harness buckle.
C. Remove any accessories, padded insert, crotch pad and shoulder
pads (if fitted).
79
Instructions for Installation & Use