Britax Safe N Sound Compaq MKII Instructions For Installation & Use page 82

CARE & MAINTENANCE
E. Remove the cover by unclipping any press studs
or hook and loops.
F. Feed crotch buckle, crotch strap slot in the cover and feed
the shoulder harness behind the centre flap.
IMPORTANT:
Do not remove the impact foam attached to the side wings.
Ensure the shoulder harness is routed over the bar if harness
straps are removed.
TO REPLACE COVER:
A. Feed the harness tongues and shoulder straps through the side
slots in the cover.
B. Stretch the cover over the top of the restraint first, then the
sides, then stretch the cover around the rim of the restraint.
Attach the elastic loops at the top of the cover located at the
back of the restraint and the elastic loops at the bottom of the
restraint located under the front of the restraint. Re-attach and
press studs or hook and loops together. Feed the crotch buckle
through slot in cover.
82
Instructions for Installation & Use
Unclip the press
studs
Crotch
slot
Hook elastic loop at the back of
the restraint
Peel away the
hook and loop