Britax Safe N Sound Compaq MKII Instructions For Installation & Use page 44

HOW TO USE
HOW TO ADJUST HEADREST & HASSLE FREE HARNESS™
A. Loosen the harness straps before adjusting the headrest.
B. To adjust the headrest, pull on the latch on the back of the restraint and pull up or down to position the
top of the shoulder strap slot above the child's shoulders. Release the latch to lock the headrest in position.
Pull headrest upwards to check it is locked in position.
C. This method can be used when the child restraint is installed in the vehicle in rearward facing position.
Small adjustments may be possible with the child still in the seat.
IMPORTANT :
Ensure harness and headrest are positioned so that the shoulder straps are just above or
inline with the child's shoulders but not lower. The bottom of the headrest side wings will
usually be just above the infant's shoulders.
It is not necessary to remove the harness straps to adjust the headrest position. Refer to
Care and Maintenance for cover removal page 79.
44
Instructions for Installation & Use
Latch
Pull