Updating Raven Xe Firmware - Sierra Wireless AirLink Raven XE User Manual

Raven XE
16
4. Observe the LEDs, as indicated in Chapter 4,
Wait approximately 30 seconds, to allow the Raven XE to initialize and go over
the air.

Updating Raven XE firmware

For installing the latest firmware version (.exe file), you can go to the Sierra
Wireless website: http://www.sierrawireless.com/support.
For the updater tool to execute, please install the USB drivers available on the
website before executing the .exe file.
Tip: Copy the USB Serial Driver.inf file to your desktop. Then power up the Raven XE and
connect USB. Install from specific location and point to this .inf file. For detailed instruc-
tions on installing the USB drivers, please refer to Universal Serial Bus Application Note.
1. Connect the Raven XE to your computer using an Ethernet cable or a USB
cable.
2. Connect the power adapter and antennas to your Raven XE.
a. A Sierra Wireless firmware update welcome screen appears. Click on
Next.
Figure 3-1: Launch Screen
b. Choose the interface you want to program the modem through and click
on Next.
The default private for Ethernet is also in a different subnet from the other
connection types.
Indicator Lights section.
20080616