Rev 4 Jan.15
Serial Port
You can connect the GX Series device's 9-pin serial connector directly to most
computers or other devices with a standard straight-through cable. This connector
is used for device configuration and debugging.
This connector complies with the EIA RS-232D specification for DCE equipment.
The output driver levels swing from -7 VDC to +7 VDC with normal loading.
Note: If you have a DCE device, you need to use a null modem cable.
5
4
3
2
1
9
8
7
6
Figure 2-23: 9-Pin Serial Connector Diagram
Table 2-4: Serial Connector Pin-out
Name
Pin
Description
DCD
1
Data Carrier Detect
TXD
2
Transmit Data
RXD
3
Receive Data
DTR
4
Data Terminal Ready
GND
5
Main GND. Connected internally to BOARD_GND
DSR
6
Data Set Ready
RTS
7
Ready To Send
CTS
8
Clear To Send
RI
9
Ring Indicator
X-Cards
The AirLink GX Series has several optional, factory-installed, expansion cards
(X-Cards) available to add more functions to the basic device. They are
configurable with ACEmanager and more information is available in the ALEOS
Software Configuration User Guide, which is available for downloading from the
Sierra Wireless web site.
The available X-Cards are:
•
Wi-Fi
Installation and Startup
Type
OUT
OUT
IN
IN
GND
OUT
IN
OUT
OUT
39