Operation Method; Setting Method; Operation; Operation Lock - Hitachi RPC-5.0FSR Operation Manual

4.

Operation Method

Refer to the operation manual of PC-ARF1.
5.

Setting Method

Refer to the operation manual of PC-ARF1.
● Adjusting Vertical Deflector
The vertical deflectors which consist 3 sets of
deflector are connected by the connecting rod.
Adjust the vertical deflectors by hand to the
required direction. To adjust them, stop swinging
the louver during the operation.
Connecting Rod
1 Set
● Automatic Setting of Louver
The swing louver is stopped and moved by
controlling the wired controller.
When "Stop" switch is pressed from the wired
controller, the swing louver will be closed
automatically and the operation is stopped.
● When "RUN" switch is pressed from the wired
controller, the swing louver will be opened
automatically. At this time, for cooling, dry and
fan operation, the indoor unit is operated with
the set temperature after the fan speed "SLOW"
operation is performed for approximately 20
seconds.
During the heating operation, the movement is
same as "Hot Start during Heating Operation".
(Refer to the item 11.)
A10762290A
Louver
Vertical Deflector
6.
7.
8.
● Swing Louver Direction during Heating Operation
* When the heating operation starts
* When the defrost operation starts
* When thermo-controller activates
The louver angle is fixed horizontally.
When the discharge temperature is
higher than 30
automatically returned to the setting
condition.
CAUTION
Do not move the louver by hand. If moved, the
louver mechanism will be damaged and the air
flow direction may not be set.
Louver

Operation

Refer to the operation manual of PC-ARF1.

Operation Lock

Refer to the operation manual of PC-ARF1.

Menu Operation

Refer to the operation manual of PC-ARF1.
Horizontal
o
C, the louver angle is
Do not move
the louver by hand.
9