Download Print this page

GRAPHTEC CE5000-40CRP Service Manual: Disassembly And Reassembly

Ce5000 series.
Hide thumbs

Advertisement

6. DISASSEMBLY AND REASSEMBLY

6.1 Exterior Parts
6.1.1 How to Replace the Right Side Cover
How to detach the right side cover
(1) Remove the three M4L6 binding head screws from the right side cover.
Note: Hold the right side cover after you have detached the screws; there is a flexible cable inside the cover.
(2) Disconnect the flexible cable which is connected to the control panel relay board.
M4L6 binding
head screw
Left side cover
How to reinstall the right side cover
(1) Connect the flexible cable to the control panel relay board, and mount the right side cover.
(2) Fasten the three M4L6 binding head screws.
6.1.2 How to Replace the Left Side Cover
How to detach the left side cover
(1) Remove the three M4L6 binding head screws from the left side cover.
How to reinstall the left side cover
(1) Fasten the three M4L6 binding head screws.
CE5000-UM-251-9370
6. DISASSEMBLY AND REASSEMBLY
M3L6 TP head screw
Center cover
Right side cover
6-1
M4L6 binding
head screw

Advertisement

   Related Manuals for GRAPHTEC CE5000-40CRP

   Related Content for GRAPHTEC CE5000-40CRP

This manual also for:

Ce5000-120, Ce5000-60, Ce5000-120ap

Comments to this Manuals

Symbols: 0
Latest comments:
  • bentayeb Aug 19, 2017 08:49:
    mon ploteur afiche une erreure y position alarm