GRAPHTEC CE5000-40CRP Service Manual page 2

No. Date issued
1 06.07.06
2 06.09.13 Information for the 9e60p was added.
3 06.09.13 Part list for the steel stand ST0068 was added.
4 06.09.13 Part number for the main board of the CE5000-40 was corrected.
5 06.09.26 Procedure of upgrading the system firmware was corrected.
6 06.09.26 Section numbers were corrected.
7 06.11.07 Procedure of adjusting the pen force was corrected.
8 06.11.16 Footer of page was wrong.
9 06.11.16 Cutting Mat 40 of part number was updated.
10 06.11.16 Cutting Mat 120 of part number was updated.
11 07.02.28 Part number for the cutter pen holder was corrected.
12 07.02.28 The cutter pen holder and the pen holder thumb screw L10
were deleted from recommended parts list.
13 07.05.18 CE5000-120AP information added.
14 07.10.19 Remark of the Main Board of CE5000-120AP was corrected.
15 08.03.04 Discription for the roll stocker was corrected.
CE5000-UM-251-9370
HISTORY OF REVISIONS
Description of revision
First Printing
ii
Page Edition
All 01
10-1,10-12 02
10-9 02
4-1,10-1 02
7-13 03
11-10 to 11-12 03
7-4 04
4-1 05
4-1,10-3 05
4-1,10-3 05
10-6 06
4-1 06
All 07
4-1 08
10-15 09