GRAPHTEC CE5000-40CRP Service Manual page 16

(3) Loosely fasten the stand side bars (L/R) to the center bar with the hexagonal socket bolts (CE5000-60:
M5, CE5000-120: M6), using the Allen wrench.
CE5000-120
(4) Mount the CE5000 cutting plotter on the stand by inserting the positioning pins on the stand into the
positioning holes on the underside of the cutting plotter. Fasten using the four coin screws or hexagonal
socket bolts (M6).
CE5000-120
(5) Tighten the hexagonal socket bolts loosely fastened in step 3.
CE5000-UM-251-9370
Center bar
Hexagonal
socket bolt
(M6)
Positioning pins
CE5000-60
Center bar
Hexagonal
socket bolt
(M6)
Stand side bar
Positioning pins
Stand
CE5000-60
CE5000-120
Stand
Hexagonal socket
bolts (M6)
2-6
2. PARTS NAMES and FUNCTIONS
Stand side bar
CE5000-60
Coin screws