Download Print this page

GRAPHTEC CE5000-40CRP Service Manual: How To Replace The Push Roller Arm

Ce5000 series.
Hide thumbs

Advertisement

6. DISASSEMBLY AND REASSEMBLY

6.2.3 How to Replace the Push Roller Arm

How to detach the push roller arm
(1) Detach the right and left side covers (see Subsection 6.1.1 and Subsection 6.1.2).
(2) Detach the center cover (see Subsection 6.1.3 or 6.1.4).
(3) Set the cam lever to the media release position.
(4) Remove the two M3L6 binding head screws attaching the cam lever.
M3L6 binding head screw
Cam lever
M3L6 binding head screw
Push roller arm spring
Cam shaft
Left cam shaft holder
(5) Remove the M3L6 binding head screw attaching the left side cam shaft holder.
(6) Remove the two M3L6 binding head screws attaching the cam sensor plate to the cam shaft.
M3L6 binding head screw
Cam sensor plate
CE5000-UM-251-9370
6-12

Advertisement

This manual also for:

Ce5000-120, Ce5000-60, Ce5000-120ap

Comments to this Manuals

Symbols: 0
Latest comments:
  • bentayeb Aug 19, 2017 08:49:
    mon ploteur afiche une erreure y position alarm