Disassembly And Reassembly; Exterior Parts; Right Side Cover - GRAPHTEC CE LITE-50 Service Manual

6

DISASSEMBLY AND REASSEMBLY

CAUTION
Be sure to spread a mat on the table when placing the surface other than the bottom of CE LITE-50 down.
The paint on the edge of the CE LITE-50 may be peeled off.
6.1

Exterior Parts

6.1.1

Right Side Cover

How to detach the right side cover
(1) Remove the three M3L6 binding head screws and the two M3L8 self-tapping screws holding the
right side cover.
M3L6 binding head screws
(2) Slightly pull apart the right side cover, and then open the rear side.
CE LITE-UM-251-9370
M3L6 binding head screw
M3L8 self-tapping screw
6 DISASSEMBLY AND REASSEMBLY
M3L8 self-tapping screw
6-1