GRAPHTEC CE5000-40CRP Service Manual page 23

(3) Mount the CE5000 cutting plotter on the stand by inserting the positioning pins on the stand into the
positioning holes on the underside of the cutting plotter. Fasten using the four coin screws or hexagonal
socket bolts (M6).
(4) Pull out the sheet support pipe and attach the sheet. Divide the sheet over the center bar, and then
fasten the sheet to the sheet support pipe using the press-studs.
Divide over the center bar
CE5000-120
CE5000-UM-251-9370
Positioning pins
CE5000-120
Sheet support pipe
Press-studs
Sheet
2. PARTS NAMES and FUNCTIONS
Positioning pins
Stand
CE5000-60
CE5000-120
Stand
Hexagonal
socket bolts (M6)
CE5000-60
Sheet
Press-studs
Divide over
the center bar
Sheet support pipe
2-13
CE5000-60
Coin screws