How To Replace The Y-Flexible Cable - GRAPHTEC CE5000-40CRP Service Manual

6.2.13 How to Replace the Y-flexible Cable
How to detach the Y-Flexible cable
(1) Detach the right side cover (see Subsection 6.1.1).
(2) Detach the center cover (see Subsection 6.1.3 or 6.1.4).
(3) Detach the front guide (see Subsection 6.1.5 or 6.1.6).
(4) Remove the wiring harness tie-wrap holding the Y-flexible cable and the core on the Y-relay board.
(5) Detach the core attached with double-sided adhesive tape to the Y-relay board.
(6) Disconnect the Y-flexible cable from connector J501 on the Y-relay board.
(7) Disconnect the Y-flexible cable from connector J1 on the main board.
(8) Remove the four plastic rivets holding the flexible cable stopper.
(9) Remove the Y-flexible cable attached with double-sided adhesive tape to the Y-rail.
CE5000-UM-251-9370
Plastic rivet
Y flexible cable
6-28
6. DISASSEMBLY AND REASSEMBLY
Flexible cable
stopper