Message Type Error Display And Remedies - MUTOH Valuejet VJ-2638 Operation Manual

VJ-2638/1638/1638W OPERATION MANUAL
No. Display
17 Power Off
18 Change Head Gap Low
19 Change Head Gap High
20 Insert CleaningCart.
21 Insert InkCartridges
22 User: Type ** OK?
23 Media Initial
7.2.2

Message type error display and remedies

This section describes message type errors and remedies.
Message type errors are displayed when certain failures occur during printer operation.
If a message type error occurs, the printer may display the following error messages on Operation panel
and stop operation.
If the printer stops operating, solve the error so that the printer restarts.
NOTE
When an error occurs in the color measuring mode (numbers 26 to 38 below), clear the error and
then press the [Cancel] key more than two seconds to solve the message type error.
No. Display
1 Cover Open
2 Mainte.CoverL Open
3 Mainte.CoverR Open
4 Lower the lever
7.2 Error messages
Turning the printer off.
Please wait a while.
Do not unplug Power cord set till Operation
panel is turned off.
Displayed in the following cases.
• During power shutdown
• Before head cleaning
Set the head height to Low.
Set the head height to High.
Starts printing.
Washing Print head.
Install Cleaning cartridge.
Filling the ink.
Insert Ink cartridge.
Initializing the media.
Please wait a while.
(** represents the set User type.)
Description
Front cover is open.
Left Maintenance cover is
open.
Right Maintenance cover is
open.
Media loading lever is raised. Lower Media loading lever.
Description
Remedy
Close Front cover.
Close Maintenance cover.
Close Maintenance cover.
Troubleshooting
Reference
3.2.2 Turning
the power OFF
4.2.5.3 When
setting the head
height to Low
4.2.5.2 When
setting the head
height to High
3.3 Filling ink
3.3 Filling ink
3.4.3 Setting
the User Type
Setting
Reference
3.4 Loading
media
2.2 Names of
parts and
functions
2.2 Names of
parts and
functions
2.2 Names of
parts and
functions
285