Output Mode Menu; Ink Dry Time Menu - MUTOH Valuejet VJ-2638 Operation Manual

VJ-2638/1638/1638W OPERATION MANUAL
5.1.6

Output Mode menu

Sets the media ejection method after printing.
NOTE
• When the take-up unit is not installed, do not set Output mode to "Take-up". By doing so, the
product will be unable to function properly.
• When the Output Mode menu is set to "Take-up", the setting for the Prev. Stick menu is disabled.
5.1.9 Prev. Stick menu (VJ-2638/1638)
Setup item
Output mode
5.1.6.1

Ink Dry Time menu

Set the ink drying time.
Setup item
Ink dry time
5.1 Setup menu
Setting
<Off>
Take-up
Auto cut
—
Setting
<0sec> to 60min
—
Description
Set when not cutting the media automatically after printing.
(Set it to Off even when cutting the media manually.))
Set when using the take-up unit.
(The media will not be cut after printing.))
Set when cutting the media automatically.
5.1.7 Method of Cut menu
• [Enter] key: saves the setting and shifts to the sub menu.
5.1.6.1 Ink Dry Time menu
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
Description
Set the ink drying time.
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.6 Output Mode menu
Panel setup menu
191