Panel setup menu
5.1.17 Roll Length menu
Sets up the roll media length.
Setup item
Roll media
5.1.17.1 Roll Length menu
Sets up the roll media length.
NOTE
• After replacing the roll media, set the roll media length again.
If the roll media length is not set, the residual quantity of roll media may not be displayed correctly.
Setup item
Length
200
Setting
<Off>
Roll1
Roll2
Roll3
—
Setting
1 m to <30 m> to 99 m
—
VJ-2638/1638/1638W OPERATION MANUAL
Description
Roll Length is not used.
• [Enter] key: saves the setting and shifts to the previous
menu.
5.1 Setup menu
Sets up the roll media length.
The set values of the roll media length can be set as "Roll1" to
"Roll3".
• [Enter] key: saves the setting and shifts to the sub menu.
5.1.17.1 Roll Length menu
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
Description
Sets the roll media length.
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.17 Roll Length menu
5.1 Setup menu