MUTOH Valuejet VJ-2638 Operation Manual page 206

Panel setup menu
(2) Init.Adj.Change menu
Sets up Initial Adjust Change.
Setup item
Init.
(3) Confirm Print menu
Performs Confirm Print.
Setup item
FeedLength
(4) Micro Adj. Print menu
Performs Micro Adjustment Print.
Setup item
Micro Adj. Print
180
Setting
The setting value of
"FeedLength" in the initial
adjustment printing ±50.0mm
—
Setting
100mm to <250mm> to
500mm
—
Setting
—
—
VJ-2638/1638/1638W OPERATION MANUAL
Description
Sets up Initial Adjust Change.
Example: When the value of "FeedLength" in the initial
adjustment printing is set to 250mm, the adjustment range of
this menu is 200mm to 300mm.
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1.3 Media feed compensation
Description
Changes the length (feed length) of the media feed direction
for Confirm Print.
• [Enter] key:
Determines the setting.
"Printing" is displayed on Operation panel and initial adjust
print starts.
After printing, the printer enters Normal.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1.3 Media feed compensation
Description
Prints the following PF pattern (micro adjustment) with a
focus on the micro adjustment value.
• 0%, ±0.05%, ±0.1%, ±0.2%
• [Cancel] key: shifts to the previous menu.
If during printing, printing will be paused.
5.1 Setup menu
5.1 Setup menu