VJ-2638/1638/1638W OPERATION MANUAL
9. Press the release buttons on both sides of spectrophotometer (SPECTROVUE VM-10), install it to
the connector of Print head.
1
No.
1
2
3
4
NOTE
• Make sure that Spectrophotometer is NOT installed at an angle, and that there in no gap between
the connector and Spectrophotometer.
10. Press the [Enter] key.
•
"Wait for a while..." is displayed on Operation panel.
•
The printer checks the connection between the printer and Spectrophotometer.
•
"Set white plate, then close left maintenance cover." is displayed on Operation panel.
4.5 Using Spectrophotometer (VJ-2638/1638)
2
Spectrophotometer
Release buttons
Print head section
Connector
1
Name
Handling the printer
3
4
163