Error Message Display And Remedies - MUTOH ValueJet 1608 HS User Manual

User's Guide ValueJet 1608 HS
7.2.2

Error message display and remedies

This section describes error messages and remedies.
Error messages are displayed when certain failures occur during printer operation.
If an error that can be displayed occurs, the printer may display the following error messages
on the operation panel and stop operation.
If the printer stops operating, solve the error so that the printer restarts.
1
2
3
4
5
6
7
8
9
174
Downloaded From ManualsPrinter.com Manuals
N° Display
Undefined Media
Media Slant
End Of Roll
[*******]
S/C NearEnd
[*******]
S/C InkEnd
[*******]
No S/C Card
[*******]
NotOriginal
Full WasteInkTank
Life Times [Head]
Description
Failed in identifying
the media. Reload the media.
(Stops operation)
The media was not
fed straight. Reload the media.
(Stops operation)
The roll media has
Load a new roll
run out.
media.
(Stops operation)
Replace with new ink
Ink is running out.
S/C cards and ink
(Continues operation)
bags.
Replace with new ink
Ink has run out.
S/C cards and ink
(Stops operation)
bags.
No S/C card is
inserted. Insert an S/C card.
(Stops operation)

The inserted S/C card
is corrupted.
The S/C card is
inserted in the wrong

location.
Reading S/C card
information failed.

(Stops operation)
The waste fluid tank
Dispose of waste
is full.
fluid.
(Stops operation)
The operational life of
the print head has Contact your local
almost expired. Mutoh dealer.
(Continues operation)
Remedy Reference
Loading roll
media on
page 37
Loading roll
media on
page 37
Loading roll
media on
page 37
Replacing the
ink bags on
page 61
Replacing the
ink bags on
page 61
Replacing the
ink bags on
page 61
Insert a
non-corrupted S/C
card.
Replacing the
Insert the S/C card
ink bags on
into the correct
page 61
location.
Re-insert the S/C
card.
Emptying the
waste bottle on
page 66
—
AP-75810 - Revision 2.0