MUTOH Valuejet VJ-2638 Operation Manual page 162

Handling the printer
c. Press the [Enter] key on Operation panel.
• "User: TypeXX" (XX is a number between 1 and 15) is displayed on Operation panel.
d. Press the [+] key or [-] key on Operation panel to select the user type to use.
e. Press the [Enter] key on Operation panel.
• "**>1: Print Mode" is displayed on Operation panel.
TIP
The selected user type (Type 1 to 15) is displayed in "**".
5.1.1 User Type menu
f. Press the [+] key or [-] key on Operation panel to select "**>3: PF Adjust".
g. Press the [>] key on Operation panel.
• "PF1: Initial Print" is displayed on Operation panel.
• Proceed to Dist.Adj menu.
5.1.1.1.3 Media feed compensation
2. Performs Initial Adjust Print.
a. Press the [Enter] key on Operation panel.
• "Feed Length: 250 mm" is displayed on Operation panel.
TIP
The length of media that is fed (feeding length) for initial adjustment printing is normally set at 250 mm.
If you increase the feeding length, the accuracy of the Media feed compensation improves.
To change the feeding length, press the [+] key or [-] key on Operation panel and change the set value.
136
VJ-2638/1638/1638W OPERATION MANUAL
4.2 Media