MUTOH Valuejet VJ-2638 Operation Manual page 112

Before using
• The printing of following items starts.
a. Date
b. Serial Number
c. Color Difference（dE）
0.6 0.2 0.6
User Type = Type 3 Pre Heater
Praten Heater = 42˚C
Dryer
No.
1
2
3
22. Check the color difference (dE).
Followings are the commonly recognized indications of color difference (dE).
• If dE is under 1.0, the color differences cannot be detected by human eyes.
• If dE is under 3.2, the color differences cannot be detected unless compared to one another.
• If dE is under 6.5, the colors are sensuously judged as the same.
NOTE
• In order to perform the Color Verify correctly, make sure to specify the following settings same as
the setting when the baseline was saved. If these settings are different, the color difference may
become large.
• Each Heater Temperature Setting, Effect Setting, CR Print Width Setting, Overwrite Setting
• Since the room environment (temperature, humidity) may affect the print color, create the
environment in accordance with the environment condition described in the operating manual
"
8.1.1 Printer specifications
media and ink in the printing environment for 2 hours before use.
• "Color Verify" is a function to check the color variation in print color caused by various causes.
This function is not to guarantee the color reproducibility.
• Since the judgment of color acceptance is largely dependent on the human eye, we recommend to
perform the print to check the color.
• The message "Update Result?" is displayed on the operation panel.
86
0.1 0.5 0.6 0.6
= 42˚C Head Temp. =25˚C dE(94) < 1.0: No discernable difference in color.
dE(94) < 3.2: Minimally discernable color difference for colors viewed side-by-side.
= 42˚C dE(94) < 6.5: Minimally discernable color difference for colors in close proximity, not side-by-sid
Date
Serial Number
Color Difference（dE）
" "Environment Condition". In addition, make sure to place the
VJ-2638/1638/1638W OPERATION MANUAL
C o l o r V e r i f i c a t i o n
1.1 1.2 0.2 0.1
Name
2012/10/01 15:25
Serial No. = XXXXXXXXXX
0.4 0.3 0.3
3.5 Test print
1
2
3