Message Type Error Display And Remedies - MUTOH VJ-1624 Operation Manual

VJ-1624 OPERATION MANUAL
No. Display
17 ** Initialing **
18 Power Off
19 Change Head Gap Low
20 Insert CleaningCart.
21 Insert InkCartridgess
22 User: Type ** OK?
23 Media Initial
7.2.2

Message type error display and remedies

This section describes message type errors and remedies.
Message type errors are displayed when certain failures occur during printer operation.
If a message type error occurs, the printer may display the following error messages on the operation
panel and stop operation.
If the printer stops operating, solve the error so that the printer restarts.
NOTE
For color measuring mode errors (errors 25 to 36 below), take countermeasures, and press the [Cancel]
key for more than 2 seconds to solve the message type error.
No. Display
1 Cover Open
2 Mainte. CoverL Open
3 Mainte. CoverR Open
4 Lever Up
5 Lever Up
Initializing the setting in the Initialization
menu.
Please wait a while.
Turning the printer off.
Please wait a while.
Do not unplug the power cable till the
operation panel is turned off.
Turning the power off.
Set the head height to Low.
Washing the head.
Install the cleaning cartridge.
Filling the ink.
Insert the ink cartridge.
Initializing the media.
Please wait a while.
(** represents the setup media type. )
Description
Front cover is open.
Left Maintenance cover is
open.
Right Maintenance cover is
open.
Media set lever is raised.
Media is not loaded.
7-9
Description
Remedy
Close the front cover.
Close Maintenance cover.
Close Maintenance cover.
Lower Media set lever.
Set the media.
7 Troubleshooting
Reference
5.1.21
Initialization menu
3.2.2 Turning the
power OFF
4.2.5.2 When
returning the print
head to the original
position
3.3 Installing ink
cartridges
3.3 Installing ink
cartridges
3.4.3 Setting the
User Type Setting
Reference
3.4 Loading
media
2.2 Names of
parts and functions
2.2 Names of
parts and functions
2.2 Names of
parts and functions
3.4 Loading
media