Handling the printer
4.2.6.2
How to fix the media firmly
1. Load the roll media.
3.4.2 Setting Roll Media
2. Lower the media loading lever.
No.
1
3. Adjust the Media feed compensation value again.
4.2.6.1 Procedure for the media feed compensation value
4.2.7
Installing Media holder plates
Variations in quality and use conditions can cause the edges of the media to curl, resulting in damage to
the media by the print head surface.
To prevent this, use Media holder plates to reduce the amount of curling in the media.
Follow the procedure below to install Media holder plates.
1. Display the Side Margin menu on Operation panel.
a. Press the [Menu] key on Operation panel.
•
"Menu1: Setup>" is displayed on Operation panel.
•
Operation panel shifts to the Setup menu display.
b. Press the [>] key on Operation panel.
•
"Set1: User Type" is displayed on Operation panel.
c. Press the [+] key or [-] key to select Set3: Side Margin.
142
Media loading lever
VJ-2638/1638/1638W OPERATION MANUAL
Name
1
4.2 Media