Error Messages; Status Messages - MUTOH Valuejet VJ-2638 Operation Manual

Troubleshooting
7.2

Error messages

This section describes messages displayed during normal printer operation or when errors occur, and
solutions to the messages.
7.2.1

Status messages

This section describes messages displayed during printer normal operation.
When the printer is operating correctly, each operation status is displayed on Operation panel as below.
No. Display
1 Ready to Print
2 Media End
3 Receiving
4 Analyzing data
5 Printing
6 PrintRestart --> ENTER
7 Warming Up
8 Warming Up
Skip -> Enter
9 Cleaning **%
10 Ink Refill **%
11 SubTank Refill
12 Moving Origin Pos.
13 Confirm Position -> Enter
14 During Washing
15 Remove Cartridges
16 ** Initializing **
284
VJ-2638/1638/1638W OPERATION MANUAL
Description
Standby (Media is loaded).
Standby (Media is not loaded).
Receiving data.
Analyzing data.
Under printing.
Pausing printing.
Press the [Enter] key.
Warming up Heater.
(VJ-2638/1638)
Received the printing data while Heater is
warming up.
To start printing before Heater is warmed up,
press the [Enter] key.
(VJ-2638/1638)
Cleaning the head.
Please wait a while.
Filling the ink.
Please wait a while.
Filling the subtank.
Please wait a while.
Print head is moving to the original printing
position in the Origin menu.
Please wait a while.
Print head is moving to the original printing
position in the Origin menu.
Press the [Enter] key.
Cleaning Head.
Please wait a while.
Perform head cleaning.
Remove Cartridge.
Initializing the setting in the Initialization
menu.
Please wait a while.
Reference
—
3.4 Loading
media
—
—
—
4.4.6 Pausing
printing
—
4.4.7 Starting
printing during
warming up (VJ-
2638/1638)
6.2.3 Head
cleaning
3.3 Filling ink
3.3 Filling ink
5.1.7.1 Cut
Pressure menu
5.1.7.1 Cut
Pressure menu
5.1.19
Longstore menu
5.1.19
Longstore menu
5.1.21
Initialization menu
7.2 Error messages