Panel setup menu
5.1.15 Auto Cleaning menu
Configure the settings for the auto cleaning operation.
TIP
The cleaning mode reflects the settings in Operation panel.
6.2.3 Head cleaning
NOTE
• When the head height is set to High, auto cleaning is not performed.
Setup item
Auto Cleaning
5.1.15.1 Idle Auto Cleaning
Set the auto cleaning interval for the standby mode.
Setup item
WaitingTime
198
Setting
WaitingTime
Pringing time
Before printing
—
Setting
Off to 10 mins to <360 mins>
to 1440 mins
—
VJ-2638/1638/1638W OPERATION MANUAL
Description
Set the value for auto-cleaning in standby mode.
5.1.15.1 Idle Auto Cleaning
Set the value for auto cleaning during printing.
5.1.15.2 Printing Mode Auto Cleaning
Set the value for auto cleaning before printing.
5.1.15.3 Pre-printing Mode Auto Cleaning
• [Enter] key: saves the setting and shifts to the sub menu.
• [Cancel] key: shifts to the previous menu.
5.1 Setup menu
Description
Sets the time for auto cleaning in WaitingTime mode.
• Off: Auto cleaning is not performed.
• Others: Perform the head cleaning selected in Cleaning
menu after the setting time has elapsed.
6.2.3 Head cleaning
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.15 Auto Cleaning menu
5.1 Setup menu