VJ-2638/1638/1638W OPERATION MANUAL
5. Pull the roll media out about 1 m from the front Media feed slot which is located inside of Front
cover.
No.
1
2
6. Rewind the roll media a little by rolling Flange on Roll media holder while holding the edge of the
media, and eliminate any slack or slant.
NOTE
• If you set the roll media free while rewinding, the roll media may fall out from Media feed slot and
fall toward the back of the printer.
• Confirm that the right edge of the roll media does not go beyond the loading mark.
If it does, it may affect print quality.
No.
1
2
3.4 Loading media
Roll media
Media feed slot
Roll media
Media loading mark
Name
Name
Before using
2
1
2
1
1
59