Cutting Media Manually - MUTOH Valuejet VJ-2638 Operation Manual

Handling the printer
4.4.4

Cutting media manually

This section explains how to cut the roll media manually.
Since VJ-2638/1638 is equipped with Heaters, strictly comply with the following Cautions.
CAUTION
• Right after printing, Media guide becomes very hot.
Allow Media guide to cool down before the next operation.
Follow the procedure below to cut the roll media.
1. Verify the following regarding the operational condition of the printer.
• Printing or other operations are not in progress.
• Operation panel display is Normal.
2. To change the position to cut the roll media, refer to
media to the desired cut position.
3. Open Front cover.
1
No.
1
152
Front cover
VJ-2638/1638/1638W OPERATION MANUAL
4.4.1 Feeding media
Name
4.4 Operating from Operation panel
and advance the roll